Foundation Clips for Frames
SKU: 554/8 M-1
VENDOR: Flugo
Hurry! Only 0 Left in Stock!
Pickup available at Prague
Usually ready in 24 hours
Foundation Clips for Frames
mm: 8mm
Prague
Vlastina 23
Building IX
161 00 Praha 6
Czechia
+420777427272
Foundation clips significantly simplify and accelerate the process of attaching a foundation sheet to a frame, eliminating the need for perforation or wiring. This innovative system allows for quick and easy fixation of the foundation sheet onto an assembled frame in just 30 seconds.
Product Features:
- Packaging: Box contains 300 clips
- Quick Application: Fixing a foundation sheet to an assembled frame takes only 30 seconds
Fixation Process:
- Attach clips to one side of the assembled or cleaned frame:
- Top bar: Recommended to use 3 clips
- Bottom bar: Optimal number is 2 clips
- Turn the frame over and place the foundation sheet on the pre-attached clips.
- Secure the foundation sheet with another set of clips in an opposing position to the original ones.
Additional Features:
- Alternative Uses: Clips with an 8 mm spacer can also be attached to the side bars.
- Available Options: Clips are available for bars with thicknesses of 8 mm, 10 mm, and 12 mm.
This system provides an efficient method for securing foundation sheets, streamlining the process, and eliminating the need for additional accessories.
LT01: 70% wool, 15% polyester, 10% polyamide, 5% acrylic 900 Grms/mt
- Machine wash
- Mashine wash, permanent press
- Machine wash, gentle or delicate
- Hand wash
- Do not wash
- 30°C or 80°F
- 40°C or 105°
- 50°C or 120°F
- 60°C or 140°F
- 70°C or 160°F
- 95°C or 200°F
- 30°C or 80°F
- 40°C or 105°F
- 50°C or 120°F
- 60°C or 140°F
- 70°C or 160°F
- 95°C or 200°F
- Do not wring
- Bleach if needed
- Do not Bleach
- Non-chlorine bleach if needed
- Non-chlorine bleach if needed
- Trumble dry
- Dry normal, low heat
- Dry normal, mediun heat
- Dry normal, high heat
- Dry normal, not heat
- Hanf to dry
- Drip dry
- Dry flat°
- Dry in the shade
- Don not dry
- Don not tumble dry
- Dry
- Do not dry Clean
- Iron any temp, steam
- Do not iron
- Maximum 110°C or 230°F
- Maximum 150°C or 300°F
- Maximum 200°C or 390°F
- No steam
- Dryclean
- Any solvent
- Except tetrachlorethylene
- Petroleum solvent only
- Wet cleaning
Note: you can configure same tab for all products at your store
